Measurement Reliability for Compliance, Quality, and Safety
In the pharmaceutical industry, precise measurement is essential for safety and compliance. Whether in sterile filling lines, drying systems, cleanrooms, or storage facilities, all relevant parameters must be controlled, verified, and documented. GMP, ISO 14644, and FDA 21 CFR Part 11 require continuous monitoring, traceable calibration, and certified devices in ATEX/IECEx zones. E+E Elektronik delivers cleanroom-ready sensors for the pharmaceutical industry covering humidity, temperature, differential pressure, air velocity, dew point, and CO₂ with robust, sterilisation-resistant design to ensure accurate, compliant operation across the pharmaceutical value chain.
Sterilisation-resistant design with catalytic H₂O₂ filter caps, E+E proprietary sensor coating, and stainless-steel housings
Complete measurement portfolio for both process machinery and plant monitoring
Accredited in-house calibration for verifiable accuracy and NMI-traceability
Seamless integration into process controls, BMS, and EMS via analog and digital interfaces
Ensure reliable GMP-compliant measurements. Stable under sterilisation, high heat and solvents — for precise humidity, temperature, pressure and airflow control.
Pharmaceutical Plants
For the use of this service, prior consent to the processing of your data and in particular to the setting of cookies is necessary. You can consent to the processing and setting of cookies here. Without your consent, your data will not be processed in connection with this service and no cookies will be set. You can revoke your consent at any time. For more information on cookies and the processing of your data in connection with this content and a way to revoke your consent, please see our privacy policy.
Sensors are vital in the pharmaceutical industry, ensuring the highest standards of cleanliness and environmental control in cleanrooms. E+E sensors provide precise and reliable data, helping customers maintain compliance with stringent regulations, optimize processes, and ensure the safety and efficacy of pharmaceutical products.
Discover the perfect product for your needs
Air Velocity
Air flow measurement for climatic and clean room technology based on the anemometer principle.
Temperature
Temperature sensors and transmitters for HVAC and process control.
Humidity
Humidity sensors and transmitters for process control, HVAC, OEM and mass applications.
Pressure
Multi-range, user configurable differential pressure sensors
Moisture in Oil
Oil condition sensors for moisture measurement in insulation, lubrication, transmission and hydraulic oils.
Dew Point
Dew point sensors / transmitters with auto-calibration for the measurement of low dewpoints.
CO₂
Dual wavelength NDIR CO₂ measurement for demand controlled ventilation and process control
Flow
Thermal mass flowmeter for compressed air and non-corrosive gases.
You want to know more about our products?
Tell us about your application – we’ll recommend a suitable sensor or calibration solution tailored to your needs.
For security and compliance reasons, we use a double opt-in process and rely on a third-party service to handle your request. Please confirm your consent by clicking the button above. Learn more in our
privacy policy
.
Matthew Nemeth | Managing Director E+E Elektronik Corporation USA
This website uses cookies
We use cookies and tracking technologies (including those from third parties) to optimise our website and integrate features such as Google Maps and YouTube.
Your data may be transferred to the USA, where a lower level of data protection compared to the EU applies. Therefore, data transfer will only occur with your explicit consent.
Please choose in the cookie settings which cookies you wish to allow. Non-essential cookies will only be set with your consent. Without your consent, some features of the website may be restricted.
You can withdraw your consent at any time in the cookie settings. For more information, please refer to our Privacy Policy.
Your data protection settings
Enable and disable individual cookies. Required cookies cannot be disabled.
This is a Microsoft cookie that contains a GUID assigned to your browser. It gets set when you interact with a Microsoft property, including a UET beacon call or a visit to a Microsoft property through the browser.
Expires after
12 months
Cookie Name
_uetsid
Purpose
This contains the session ID for a unique session on the site. Note: As of as of July 2023, _uetsid has been updated with additional parameters as follows: insights_sessionId, timestamp, pagenumber, upgrade, upload.
Expires after
30 minutes
Cookie Name
_uetvid
Purpose
UET assigns this unique, pseudoanonymized visitor ID, representing a unique visitor. UET stores this data in a first-party cookie. Note: As of as of July 2023, _uetvid has been updated with additional parameters as follows: insights_userId, cookieVersion, expiryTime, consent, cookie_creation_time.
Expires after
12 months
Cookie Name
_RwBf
Purpose
This cookie helps to track the effectiveness of advertising campaigns on the Bing advertising network.
Expires after
6 months
Cookie Name
_uetmsclkid
Purpose
This is the Microsoft Click ID, which is used to improve the accuracy of conversion tracking.
Expires after
6 months
Cookie Name
MSPTC
Purpose
UET assigns this unique, pseudoanonymized visitor ID, representing a unique visitor. It's a partition cookie. This cookie is used in the browsers' Privacy API.
Expires after
6 months
Cookie Name
MR
Purpose
This is a Microsoft cookie that contains a binary flag. It gets set when you interact with a Microsoft property, including a UET beacon call or a visit to a Microsoft property through the browser.
