The EE046 warns early and reliably of a condensation risk. It thus helps to prevent dripping or mould at critical cold spots. The condensation monitor can be mounted on flat surfaces and on pipes.
Reliable Condensation Warning Condensation on a surface occurs when the relative humidity (RH) of the air close to the surface reaches 100 %. The EE046 condensation monitor measures accurately the relative humidity of the air at the surface temperature. An early warning is given via the relay output when this reaches a value of 90 % RH, just before condensation occurs. The relay also indicates a power supply failure or a broken cable. Additionally, an LED indicates the operating status of the EE046 (normal operation / alarm / power supply failure).
Mounting on Surfaces and Pipes The EE046 condensation monitor is available in two versions. The wall/pipe mount model is appropriate for installation on flat surfaces and on pipes with a diameter of up to 50 mm (2"). It is mounted on cooling ceilings, on cooling or cold water piping, cooled surfaces and chilled beams.
Snap-On Model for Pipes with 16 mm (0.63") Diameter The snap-on model can be mounted on plastic and aluminium composite pipes with 16 mm (0.63") diameter. Typical applications for this model are cooling and heating by concrete core activation.
Fast Response Time, Long-Term Stable Measurement Because of the very good thermal coupling with the surface, the EE046 responds very quickly to humidity or surface temperature changes.
The high-quality humidity sensing element is protected against dust and dirt by the E+E proprietary coating. This ensures long-term stable and reliable measurements in harsh and polluted environments.
Typical Applications
Concrete core activation
Chilled beams
Switching cabinets
Climate control
We are always available to answer any questions you may have!Inquire now
Fast response time
Dust protection
Compact design and easy mounting
LED status indication
Working range
10...100% RH
Switching point
90 ±3% RH
Response time at change of the surface temperature
t90 < 3 min.
Response time at change of the relative humidity
t90 < 25 sec.
Max. switch load
24 V AC/DC, 1 A
Supply
24 V AC/DC
You want to know more about our products?Inquire now
Nam Seung Baeg, HLeng
We use the EE355 and TDS501 dew point sensors in dehumidifiers and air dryers for battery and semiconductor applications. Their stable, highly accurate measurements, competitive pricing and reliable local support make E+E Elektronik a trusted partner for us.
This software is provided "AS IS" without a warranty or representations of any kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT ARE HEREBY EXCLUDED. E+E AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL E+E OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF E+E HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.THE ENTIRE RISK ARISING OUT OF USE, PERFORMANCE OR NON-PERFORMANCE OF THE SOFTWARE REMAINS WITH THE LICENSEE. IF E+E SHOULD NEVERTHELESS BE FOUND LIABLE, WHETER DIRECTLY OR INDRECTLY, FOR ANY LOSS, DAMAGE OR INJURY ARISING UNDER THIS AGREEMENT OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, ON ANY BASIS WHATSOEVER, ITS TOTAL MAXIMUM LIABILITY IS LIMITED TO EURO 50.000. WHICH WILL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST E+E. IF THIS LIMIT OF EURO 50.000 SHOULD NOT BE VALID BOTH PARTIES AGREE UPON THE NEXT ADMISSABLE LIMIT. All CLAIMS WILL BE TIMEBARRED AFTER 6 MONTH AFTER THE CLAIM AROSE AND THE LICENSEE OBTAINS KNOWLEDGE OF THE CIRCUMSTANCES GIVING RISE TO THE CLAIM OR WOULD HAVE OBTAINED SUCH KNOWLEDGE IF HE HAD NOT SHOWN GROSS NEGLIGENCE.
This software is in particular not designed or intended .for use in on-line control of aircraft, air traffic, aircraft navigation or aircraft communications; or in the design, construction, Operation or maintenance of any nuclear facility. Licensee represents and warrants that it will not use or redistribute the Software for such purposes.
You want to know more about our products?
Tell us about your application – we’ll recommend a suitable sensor or calibration solution tailored to your needs.
For security and compliance reasons, we use a double opt-in process and rely on a third-party service to handle your request. Please confirm your consent by clicking the button above. Learn more in our
privacy policy
.
Matthew Nemeth | Managing Director E+E Elektronik Corporation USA
This website uses cookies
We use cookies and tracking technologies (including those from third parties) to optimise our website and integrate features such as Google Maps and YouTube.
Your data may be transferred to the USA, where a lower level of data protection compared to the EU applies. Therefore, data transfer will only occur with your explicit consent.
Please choose in the cookie settings which cookies you wish to allow. Non-essential cookies will only be set with your consent. Without your consent, some features of the website may be restricted.
You can withdraw your consent at any time in the cookie settings. For more information, please refer to our Privacy Policy.
Your data protection settings
Enable and disable individual cookies. Required cookies cannot be disabled.
This is a Microsoft cookie that contains a GUID assigned to your browser. It gets set when you interact with a Microsoft property, including a UET beacon call or a visit to a Microsoft property through the browser.
Expires after
12 months
Cookie Name
_uetsid
Purpose
This contains the session ID for a unique session on the site. Note: As of as of July 2023, _uetsid has been updated with additional parameters as follows: insights_sessionId, timestamp, pagenumber, upgrade, upload.
Expires after
30 minutes
Cookie Name
_uetvid
Purpose
UET assigns this unique, pseudoanonymized visitor ID, representing a unique visitor. UET stores this data in a first-party cookie. Note: As of as of July 2023, _uetvid has been updated with additional parameters as follows: insights_userId, cookieVersion, expiryTime, consent, cookie_creation_time.
Expires after
12 months
Cookie Name
_RwBf
Purpose
This cookie helps to track the effectiveness of advertising campaigns on the Bing advertising network.
Expires after
6 months
Cookie Name
_uetmsclkid
Purpose
This is the Microsoft Click ID, which is used to improve the accuracy of conversion tracking.
Expires after
6 months
Cookie Name
MSPTC
Purpose
UET assigns this unique, pseudoanonymized visitor ID, representing a unique visitor. It's a partition cookie. This cookie is used in the browsers' Privacy API.
Expires after
6 months
Cookie Name
MR
Purpose
This is a Microsoft cookie that contains a binary flag. It gets set when you interact with a Microsoft property, including a UET beacon call or a visit to a Microsoft property through the browser.
